#MV30003 – MSC-30BL-WP BRUSHLESS SPEED CONTROLLER (T-PLUG)

kr1,295.00

1 i lager

Artikelnr: MV30003 Kategorier: , ,

Beskrivning

 

 

Replacement Brushless ESC for the Strada Red series of cars

Can also be used to upgrade the standard Strada when used in conjunction with a Brushless Motor:
#MV22602 – MM – 22BL 3215KV Brushless Motor

MSC-30BL-WP BRUSHLESS SPEED CONTROLLER
Features

  1. Water-resistant* and dust-proof. The ESC has been designed to work in wet conditions.
  2. 2-3S Capable (for 3S you must change the standard 5V cooling fan to a 12V cooling fan, or supply the 5V cooling fan from the receiver 5-6V);
  3. Compatible with sensorless brushless motor.
  4. 2 running modes (“Forward with brake” mode, “Forward/Backward with brake” mode).
  5. Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment.
  6. 4 Punch modes from “Soft” to “Very aggressive” to be suitable for different chassis, tires and tracks.
  7. Multiple protection features: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection /Throttle signal loss protection / Motor blocked protection.
  8. Easily programmed with the “SET” button

*Please remove the cooling fan when running the ESC very wet conditions.
*After running the ESC in wet conditions, please clean and dry it to avoid the oxidation to copper connectors

Specification

  1. Continuous Current: 45A
  2. Burst Current: 220A
  3. Resistance: 0.0012 ohm
  4. Application: 1/10 scale on-road and off-road
  5. Motor Limit:
  6. 2S LiPo or 6 cells NiMH – On-road: ≥9T, Off-road: ≥12T, 3650 size motor
  7. 3S LiPo or 9 cells NiMH – On-road: ≥12T, Off-road: ≥18T, 3650 size motor
  8. Battery: 4-9 Cells NiMH or 2-3S Lipo**
  9. Built-in BEC: 6V/2A
  10. Program Port: Multiplexed with cooling fan port
  11. Motor Type: Sensorless Brushless
  12. Dimension: 48.5 x 38 x 32mm
  13. Weight (with wires): 90g

**1) For 4-6 cells NiMH or 2S Lipo: You needn’t change the 5V cooling fan on the ESC;
**2) For 7-9 cells NiMH or 3S Lipo: You must change the original 5V cooling fan to 12V cooling fan, or supply the 5V cooling fan from the receiver (5-6V)

Download PDF instructions for #MV30003 (16 MB)

Recensioner

Det finns inga recensioner än.

Bli först med att recensera ”#MV30003 – MSC-30BL-WP BRUSHLESS SPEED CONTROLLER (T-PLUG)”

Din e-postadress kommer inte publiceras. Obligatoriska fält är märkta *